Hongtek Filtration Co., Ltd.
We are professional supplier of High Flow Filter Cartridges,High Flow Pleated Filters,PP Melt Blown Filters,Water Filter Cartridges,High Flow Filters,Pleated Filter Cartridges,Carbon Block Filters,Str
Business Type:Manufacturer
Country/Region:China
Ddu Verified
HOT Rank
Description
High Flow Pleated Cartridges have high particle removal efficiency and strong contaminant holding capability. PP pleated high flow cartridges utilize polypropylene end caps, outer netting and inner hard core help to protect the radial pleated structure integrity and provide consistent performance and good quality for effective particle retention. Pleated high flow cartridges can directly 100% replace to 3M Cuno 7000 and 740B high flow series filter element.
Feature
1. All polypropylene filter media construction and have wide chemical compatibility
2. Using the high flow pleated cartridges can save the replacement cost, manpower and space
3. High flow cartridge filters have high contaminant holding capacity due to the large filtration area
4. Pleated high flow cartridges are consistent high particle removal efficiencies throughout filter long life
5. The unique radial pleat design of high flow cartridges lead to high flow rate and good filtration efficiency
6. Pleated high flow cartridge filters system requires 90% fewer filters as competitive 2.5" water filter systems for a given flow rate
7. All raw materials are FDA compliant and 100% integrity testing for high flow cartridge filters, directly replace to 3M Cuno high flow series filter element
Application
1. Refining
2. Process Waters
3. Machine Coolants
4. Boiler Condensate
5. Pre-RO Filtration
6. Petroleum Chemical Industry
7. Injection & Produced Waters
8. Ground/Reclaimed/Waste Waters
Performance
Operation Data for MP Series High Flow Pleated Cartridges
| Suggested Maximum Flow Rate | 1560 LPM |
| Maximum Operating Temperature | 80℃ |
| Maximum Forward Differential Pressure | 50 psid @ 68°F (3.4 bar @ 20°C) |
| Recommended Change-out Differential Pressure | 35 psid @ 68° (2.4 bar @ 20°C) |
| Show Detail for High Flow Pleated Cartridges | ||
● Considerate designed handle easily for install and change out ● "Twist to lock" seating mechanism design to provide a positive seal ● 100% replace 3M Cuno 7000 and 740B high flow series filter element ● A large diameter core allows up to 500 gpm for per high flow pleated cartridges ● 2-3 times larger surface area than normal diameter 6" vertical pleated high flow cartridges | ||
| High Flow Pleated Cartridges vs Depth & Pleated Cartridges | ||
● The High Flow System requires 90% fewer filter cartridges as competitive 2.5" cartridge systems for a requested flow rate. ● The High Flow Housings are 33% to 50% smaller than competitively sized housings for a requested flow rate, and save much space for when using pleated high flow cartridges. ● High efficiency filtration of high flow cartridge filters is a user-friendly high flow system, means fewer filters and faser change-outs than competitive cartridges. | ||
| Installtion Example for MP Series High Flow Pleated Cartridges | ||
● Long service life and easy to replace, reduced cartridge handling ● High flow rate & low delta pressure, nominal rated filters are designed ● Cartridges are suitable to installed in standard high flow filter housings ● Radial pleated structure, large filtration area and high dirt holding capacity ● High flow pleated cartridges have rock-steady structure and reliably good sealing | ||
| MP | Material | Length | Filtration Rating | End Caps | O-ring Material |
MP Series High Flow Pleated Cartridges | P = Polypropylene | 20 = 20" | 1 = 1μm | A = Type A End Caps | E = EPDM |
| 3 = 3μm | |||||
| 40 = 40" | 5 = 5μm | N = Buna-N | |||
| 10 = 10μm | B = Type B End Caps | ||||
| 60 = 60" | 20 = 20μm | S = Silicon | |||
| 50 = 50μm | |||||
| 70 = 70μm |
For Example:
MP-P-40-5-A-E
MP Series High Flow Pleated Cartridges - Material = PP - Length = 40" - Filtration Rating = 5μm - Type A End Caps - O-ring Material = EPDM
